Let’s discuss the question: how long shaft on trolling motor. We summarize all relevant answers in section Q&A of website Abettes-culinary.com in category: MMO. See more related questions in the comments below.
How long of a shaft does my trolling motor need?
| TRANSOM TO WATERLINE | RECOMMENDED SHAFT LENGTH |
|---|---|
| 0″ – 10″ | 30″ |
| 10″ – 16″ | 36″ |
| 16″ – 20″ | 42″ |
| Over 22″ | Consult Factory |
Can a trolling motor shaft be too long?
A trolling motor shaft can be too long. If the trolling motor shaft is too long, you risk the propeller hitting bottom or the inability to stow the motor properly. Too long of a shaft can not only damage the propeller but also the rest of the motor and the environment beneath the water as well.
Shaft Length For Trolling Motors
[su_youtube url=”https://www.youtube.com/watch?v=1UaHllYr6Uw”]
Images related to the topicShaft Length For Trolling Motors
How long should a transom trolling motor shaft be?
For a rough shaft length estimate for bow motors, measure the distance from the top of your bow to the waterline and add about 18 inches. For transom motors, shaft length is generally between 30″ to 42″, depending on boat length.
How far in the water should a trolling motor be?
A trolling motor’s ideal propeller should be at a depth that keeps about 6 inches of water above the blades. In other words, the centerline of the motor and the prop shaft should be about 12-18 inches below the waterline, depending on the make, model and dimensions of the trolling motor.
How does Minn Kota measure shaft length?
Measure down from the mounting surface of the transom or bow to the water level. Add 5″ to waterline measurement for fishing in rough water. Add 12″ to waterline measurement for steering a hand control motor while standing. Use this measurement and the tables below to find the appropriate shaft length.
Can you change the shaft length on a Minn Kota trolling motor?
Quite easy to do, just remove the top cover, then there’s two wires going down thru the shaft to the motor which you’ll need to remove, and then there’s just the screw pinning the head to the shaft.
How do you measure shaft length on an outboard motor?
Measure from the top of your transom to the bottom of your keel. If it is from 15″ to 17″ long you’ll need to get a Tohatsu outboard with a “short” shaft. If it is from 20″ to 22″ long you’ll need our “long” shaft outboard.
How long should the shaft be on a pontoon trolling motor?
Most pontoon boats could really even get away with a 48″ shaft, but it is certainly better to go a little longer than you need. 55″ and 60″ trolling motor shafts are the most common for pontoon boats.
How deep should my prop be in the water?
If you have a short shaft motor, the top most part of the transom and the lower most part of the boat should be about 15 to 16 inches. For a long shaft, I think 20 to 21 inches is correct.
Watch This BEFORE Buying a Trolling Motor… ULTIMATE Buying Guide
[su_youtube url=”https://www.youtube.com/watch?v=SKsqOuuLBKo”]
Images related to the topicWatch This BEFORE Buying a Trolling Motor… ULTIMATE Buying Guide
Can you run a trolling motor out of the water?
Your motor is cooled by the water around it, while running it out of the water for a very short time would be OK, it would take a long time to drain the battery much running the motor out of the water with no load. Why risk damaging a very expensive TM to just drain the battery down.
How deep should you set your trolling motor?
Just put a Minn Kota Maxxum on my boat this afternoon. Right out of the instruction manual: When setting the depth be sure the top of the motor is submerged at least 12″ to avoid churing or agitation of surface water. The propellar must be completely submerged.
How big of a boat can a trolling motor push?
| Boat Weight (lbs) | 1,000 | 3,000 |
|---|---|---|
| Boat Length | 14-16′ | 20′ |
| Minimum Thrust | 55 | 80 |
| Performance Thrust* | 50 | 80 |
| Motor Voltage | 12v | 24v |
What is the diameter of a Minn Kota trolling motor shaft?
The diameter of the Endura shaft is 1-1/8″ (1.125″ ).
Can I shorten the shaft on my Terrova trolling motor?
Cut the amount off you want. Be careful not to cut any wires when cutting the shaft. I used a small metal pipe to slide down in the shaft to keep from cutting the wires. After cutting the shaft shorten the wires and put the head back on.
How long is a long shaft outboard motor?
Generally, short shaft outboards are 15 inches, long shaft outboards are 20 inches, and extra-long outboards are 25 inches. Since the length of the shaft of your outboard is associated with the size boat, smaller engines will generally have shorter shafts.
How long is a 5-iron shaft?
A common lie angle for a 5-iron is 61°, therefore the length of the 5-iron may be 37.25″ to achieve the B length.
How to Shorten Your Trolling Motor Shaft (Super Easy)
[su_youtube url=”https://www.youtube.com/watch?v=K0M8T4GesJw”]
Images related to the topicHow to Shorten Your Trolling Motor Shaft (Super Easy)
How many pounds of thrust do I need for a trolling motor?
General rule of thumb: you need at least 2 lbs. of thrust for every 100 lbs. of fully-loaded boat weight (people and gear included). If things like wind or current are major factors where you fish, you’ll want a little extra thrust.
Can you shorten an ultrex shaft?
Can you cut the shaft length on an Ultrex? Yes you can, but you have to be careful not to cut the wires and you have to re drill the the head screw holes in the head. I recommend you bring to a Authorized Service Center to get this done because if you do it yourself it will void the warranty on the troll motor.
Related searches
- 60 inch shaft trolling motor
- trolling motor shaft length for kayak
- trolling motor shaft length for deep v
- trolling motor shaft length for jon boat
- can you change shaft length on trolling motor
- trolling motor shaft replacement
- can you put a longer shaft on a trolling motor
- trolling motor shaft length ranger bass boat
- how long should the shaft be on my trolling motor
- trolling motor shaft too long
- trolling motor size chart
- how do you measure the length of a trolling motor shaft
- how long shaft on trolling motor for pontoon boat
- can a trolling motor shaft be too long
Information related to the topic how long shaft on trolling motor
Here are the search results of the thread how long shaft on trolling motor from Bing. You can read more if you want.
You have just come across an article on the topic how long shaft on trolling motor. If you found this article useful, please share it. Thank you very much.